Not sure if this is your device? This article is for Econo Plus series feeder kits (SKU/Product #: MFG-13054 • MFG-13057 • MFG-13056 & older models).
Double-check this info or click here to visit our "Identify My Device" page before you continue.
Troubleshooting
- Remove power for 10 seconds and re-connect wires to the corresponding battery terminals.
- Make sure the battery is hooked up properly with the positive-to-positive and the negative-to-negative.
- If the battery is hooked up properly and the unit is still running, the actual battery could be defective and will need to be replaced.
Comments
0 comments
Article is closed for comments.