Search

No Power - All-In-One Series Feeder Kit Troubleshooting

Thomas Hunt
Thomas Hunt

Not sure if this is your device? This article is for All-In-One series feeder kits (SKU/Product #: MFG-13220, MFHP12367 / MFG-13074 & older models). 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

 

Troubleshooting

Having trouble getting power?  Continue scrolling to see why your FieldNode Feeder Kit isn't powering on, or the timer display is distorted, or watch our short video below.

 

  • Make sure you are using good AA batteries such as Energizer or FieldNode batteries.
  • Check your battery again. Just because it is new does not mean that it is a good battery. Sometimes you can get a defective battery.
  • Attempt a reset by pressing and holding the reset button located on the backside of your timer, where the wires come out, for 30 seconds.
  • If using a solar panel, ensure that the battery is connected to the feeder before you plug in or clip on the solar unit.
  • Ensure the spin plate is securely on the shaft and you are using the proper dry feed.
  • Cold weather will impact your batteries as well and can cause them to lose power or freeze.

 

Watch Our Video

 

Was this article helpful?

Comments

0 comments

Article is closed for comments.