Search

Clogging - All-In-One Series Feeder Kit Troubleshooting

Thomas Hunt
Thomas Hunt

Not sure if this is your device? This article is for All-In-One series feeder kits (SKU/Product #: MFG-13220, MFHP12367 / MFG-13074 & older models). 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

 

Troubleshooting

Is your feeder clogging up?  Please see the information we have below on why that is happening and how to correct it.

Our Feeders are designed to use ¼” Whole Kernel Corn:

  • Anything drastically bigger or smaller can potentially cause material run-out, the feeder to clog or material to bridge inside the hopper.
  • If a powder like rice bran is used in a humid environment without mixing with a larger granule size, it can cake significantly and bridge over the hopper exit.
  • Some differing granule sizes can get jammed under the spin plate and cause the spin plate not to move.

  • Uncleaned Corn with severe amounts of powder or dust can eventually lead to material buildup on surfaces and cause the feeder to jam.

     

  • Molded Corn in Metal Barrels:
  • Corn will sit at the bottom of the metal barrel edges and can potentially mold.

  • To prevent this from happening you can invest in a 30 Gallon or 55 Gallon internal funnel. This is only for barrels.

     

  • Potential Causes of Moisture in Barrel/Hopper:
  • Lid not pressed down firmly.
  • Lid not twisted all the way down.
  • Hopper top and hopper bottom not pressed together firmly.

Was this article helpful?

Comments

0 comments

Article is closed for comments.