Micro Series - Setup & Use

Not sure if this is your device? This article is for the Micro Series Traditional Cameras (SKU/Product #: list at the bottom of the article).
Double-check this info or click here to visit our "Identify My Device" page before you continue.

Getting Started

Congratulations! Now that you have your Micro Series camera, continue reading to learn what you will need to get started! 

Items Needed

• Micro Series camera
• AA Batteries
• SD Card (4-32GB, SDHC Class 10 U1)

Setting Up Your Camera

Below is a menu map that all Micro Series cameras follow. To set up your device, navigate through the menu map, setting your settings as you go.

Micro Series Cameras offer the following settings:

• Detection Delay - The amount of time the camera waits to capture another image after capturing the previous one.
  
  • 0, 15, 30 Seconds, 1, 5 Minutes
• Capture Mode - How the device is set to behave when triggered.
  
  • Motion Detect - Image captured once motion is detected.
• Multi-Shot - How many images the device takes at one time.
  
  • Lo-Resolution 1-Shot
  • Hi-Resolution 1-Shot
  • Lo-Resolution 3-Burst
  • Hi-Resolution 3-Burst
  • Video
• Camera ID
  
  • 1-9
• Delete Images
  
  • Yes
  • No

SKU/Product List

Series	Model	Serial Number/SKU	Year
Micro Series	Micro 32i kit 2pack	MCG-14074	2022
Micro Series	Micro 42 Kit	MCG-14059	2022
Micro Series	Micro 42i Kit	MCG-14060	2022

Series	Store Model	Model Equalivent	Serial Number/SKU	Year
Micro Series	MICRO-AC42i Kit	Micro 42i Kit	MCG-14065	2022
Micro Series	MICRO-AC36 Kit	Micro 42 Kit	MCG-14066	2022
Micro Series	MICRO BC-28	Micro 42 Kit	MCG-14068	2022
Micro Series	MICRO BC-42i Kit	Micro 42i Kit	MCG-14069	2022
Micro Series	MICRO-BC36 Kit	Micro 42 Kit	MCG-14070	2022
Micro Series	MICRO-W42i Kit	Micro 42i Kit	MCG-14071	2022
Micro Series	MICRO W-36 Kit	Micro 42 Kit	MCG-14072	2022