No Power - All-In-One II Feeder Kit Troubleshooting

Not sure if this is your device? This article is for All-In-One II series feeder kits (SKU/Product #: MFG-15096). 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

Troubleshooting

Having trouble getting power?  Continue scrolling to see why your FieldNode Feeder Kit isn't powering on, or the timer display is distorted, or watch our short video below.

1. Do you have the device with you?
   1. If no, please retrieve the device and then begin the troubleshooting steps.
   2. If yes, proceed below.
2. Replace the batteries
   1. Remove the Timer assembly using the “Eject” button.
   2. Removal may require moderate force – this is normal and safe. The timer will not be damaged by pulling the assembly directly down.
   3. Insert 8 NEW AA Alkaline batteries (FieldNode or Energizer brand recommended).
      1. Do not use rechargeable batteries – they provide less current and can cause power issues.
3. Confirm battery orientation
   1. Ensure batteries are inserted properly. The negative (-) end should face the spring in each compartment.
   2. If installed incorrectly, reinsert properly and check again.
   3. Note: Reverse polarity should not damage the timer.
4. Check for LCD display
   1. Once batteries are correctly inserted:
      1. The LCD screen should illuminate and display 12:00 PM.
5. Confirm functionality
   1. If the LCD is now on:
      1. The timer should be broadcasting Bluetooth to connect to the app
      2. Or ready for traditional timer mode
   2. Perform a test spin using the Test button to confirm the motor is working properly.
   3. If all works as expected, no further troubleshooting is needed.
   4. If the issue persists, reach back out to us.