All-In-One II - Setup & Use

Not sure if this is your device? This article is for the All-In-One II feeder kit (SKU/Product #: MFG-15103 & MFG-15096). 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

Note: This article is for the setup of the feeder kit itself, not the hopper assembly. For hopper assembly instructions, go back a section & select our Hopper Setup section.

Getting Started

Congratulations! Now that you have your All-In-One II feeder kit, continue reading to learn how to get it up and running!

You can set up your All-In-One II Timer either through the built-in timer or using the free FieldNode App. Both options are covered below, along with a helpful setup video and downloadable manuals.

WATCH THE SETUP VIDEO

Option 1 - PROGRAM FEEDER USING THE MOULTRIE APP (Recommended) 

WHY USE THE APP?

These features are only available in the FieldNode App, and don't require a subscription:

• Sync feed times to local sunrise/sunset for automatic adjustments.
• Customize schedules to feed only on certain days of the week.
• Check estimated feed levels in the app.
• Run the feeder on demand.

HOW IT WORKS

Once your feeder is added to your FieldNode account, you can control your feeder via Bluetooth from up to 100 yards away. This allows you to adjust the feeder without disturbing the area, or feed on demand from your stand.

If you have an Edge 3 Series camera within range of your feeder, you can manage feed times remotely via cellular connectivity—from anywhere, anytime. (requires active camera subscription)

ADD YOUR FEEDER TO THE APP

1. Download the FieldNode App from the App Store or Google Play.
2. Sign up for an account or log in.
3. Ensure the feeder kit is powered on.
4. Open the FieldNode App and tap to link your feeder to your account when prompted.
5. Set feed times and adjust settings directly in the app.

Option 2 - PROGRAM FEEDER USING THE TIMER

1. POWER ON THE TIMER
   • Press any button to wake the screen.
2. SET LOCAL TIME
   • The current time will appear on the display.
   • Press SET to adjust the time. Current time will start flashing.
   • Use the UP/DOWN arrows to adjust the local time. Press and hold the arrow to scroll faster.
   • Press SET to save.
3. SET FEED TIMES
   • The All-In-One II timer allows up to 4 feed times per day, with run times of 1–20 seconds each.
   • DEFAULT SETTINGS: If you do not set feed times, the feeder will run at 7:00 AM and 6:00 PM for 6 seconds.
     • For each feed time, you will set:
       • Start Time (when feed disperses).
       • Run Time (how long the motor spins)
     • To program feed times, press the UP arrow to enter timer setup.
       • The screen will display "TIMER 1."
       • Press SET to begin programming this timer.
       • Use the UP/DOWN arrows to select the desired time.
       • Press SET to save.
     • To program run-time, press SET.
       • Use the UP/DOWN arrows to select the run-time.
       • Press SET to save.
       • Repeat for additional timers.
4. RUN A TEST
   • Press the TEST button.
   • Stand at least 10 feet away.
   • A 10-second countdown will begin, then the motor will spin.
   • The test will run for the duration of TIMER 1.
   • To cancel the test, press any button on the timer.

FACTORY RESET

IF YOU NEED TO RESET THE TIMER:

1. Hold TEST and the DOWN arrow at the same time.
   1. A 5-second countdown will begin.
2. Continue holding until "rST" appears on the screen.
3. The timer will reset to default settings.
4. If your feeder was connected to your FieldNode App account, you will need to reconnect the feeder in the app and reprogram your settings.

DOWNLOADABLE MANUALS

• All-In-One II Feeder Kit Instruction Manual
• All-In-One II Timer Instruction Manual