How To Manage My Time-lapse Setting

Not sure if this is your device? This article is for the FieldNode app & website. 
Double-check this info or click here to visit our "Identify My Device" page before you continue.

Important Notes: This feature is available in our app & website; available camera features may vary by model—please refer to your manual for details specific to your device.

How to Manage Your Time-lapse Setting

SETTINGS DEFINED

Time-Lapse Only:  This option will disable the motion detection function and capture pictures at set intervals based on the selected time-lapse period.

Motion + Time-Lapse:  This option will allow the camera to capture pictures when motion is detected, as well as the time-lapse intervals selected.

Pro Tip:

The motion+time-lapse setting is great for large fields and open hardwoods, allowing you to capture animals passing throughout the day while also triggering the camera during any high traffic times such as dawn and dusk, when some animals may be outside the detection range.

How to trigger a photo every 24 hours using time-lapse+motion setting:

1.  Go to your Devices page in the FieldNode app

2.  Tap the Settings icon on the camera that you want to take a daily picture

3.  Tap Time-lapse Settings

4.  Tap Time-lapse Mode and click Edit Time-lapse

5.  Set Start and Stop Time to All Day, set your interval to 24 hours.

6.  Toggle the Motion Detection ON in order to be in time-lapse+motion state

7.  Press Save to save the time-lapse settings. The new settings will be applied the next time the camera checks in.